IS 250C V6-2.5L (4GR-FSE) (2011)
Seat Belt Control Module: Service and Repair
Removal
PRE-COLLISION: SEAT BELT CONTROL ECU: REMOVAL
1. OPEN METAL TOP ROOF
(a) Open the metal top roof as shown in the illustration.
2. REMOVE REAR SEAT CUSHION ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal
3. REMOVE REAR SEAT CUSHION ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal
4. REMOVE PACKAGE TRAY TRIM GARNISH LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal
5. REMOVE PACKAGE TRAY TRIM GARNISH RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Removal
6. REMOVE REAR SEATBACK ASSEMBLY WITH REAR CONSOLE BOX ASSEMBLY See: Body and Frame/Seats/Service and
Repair/Removal and Replacement/Rear Seat Assembly/Removal
7. REMOVE SEAT BELT CONTROL ECU
(a) Disconnect the 2 connectors.
(b) Remove the 2 nuts and seat belt control ECU.