IS 250C V6-2.5L (4GR-FSE) (2011)
Starter Relay: Testing and Inspection
4GR-FSE STARTING: RELAY: ON-VEHICLE INSPECTION
1. INSPECT STARTER RELAY
(a) Using an ohmmeter, measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the relay.
2. INSPECT STARTER CUT RELAY
(a) Using an ohmmeter, measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the relay.