IS 250C V6-2.5L (4GR-FSE) (2011)
(e) Check that there is no looseness in the installation parts of the door side airbag sensor.
2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Reassembly
3. INSTALL COURTESY LIGHT ASSEMBLY See: Lighting and Horns/Courtesy Lamp/Service and Repair/Vehicle Interior/Door Courtesy
Light/Installation
4. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL See: Body
and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair/Reassembly
5. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service
and Repair/Reassembly
6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Reassembly
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. PERFORM DIAGNOSTIC SYSTEM CHECK
(a) Perform a diagnostic system check See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
9. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System.