IS 250C V6-2.5L (4GR-FSE) (2011)
Seat Belt Control Module: Service and Repair
Installation
PRE-COLLISION: SEAT BELT CONTROL ECU: INSTALLATION
1. INSTALL SEAT BELT CONTROL ECU
(a) Install the seat belt control ECU with the 2 nuts.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Connect the 2 connectors.
2. INSTALL REAR SEATBACK ASSEMBLY WITH REAR CONSOLE BOX ASSEMBLY See: Body and Frame/Seats/Service and
Repair/Removal and Replacement/Rear Seat Assembly/Installation
3. INSTALL PACKAGE TRAY TRIM GARNISH LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Installation
4. INSTALL PACKAGE TRAY TRIM GARNISH RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Installation
5. INSTALL REAR SEAT CUSHION ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Installation
6. INSTALL REAR SEAT CUSHION ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly/Installation
7. CLOSE METAL TOP ROOF
(a) Close the metal top roof as shown in the illustration.