IS 250C V6-2.5L (4GR-FSE) (2011)
3. CONNECT FRONT SEAT OUTER BELT ASSEMBLY (for LH Side)
(a) Install the belt guide.
(1) Engage the 3 guides.
(2) Engage the 3 claws to install the belt guide.
(b) Connect the anchor part of the front seat outer belt assembly with the bolt.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
4. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY (for RH Side)
(a) Pass the floor anchor of the front seat outer belt assembly through the front quarter trim panel assembly.
(b) w/ Front Center Speaker:
(1) Connect the connector.
5. CONNECT FRONT SEAT OUTER BELT ASSEMBLY (for RH Side)
(a) w/ Belt Tension Sensor:
(1) Pass the wire harness for floor anchor of the front seat outer belt assembly through the floor carpet.
(2) Engage the 2 clamps and connect the connector.
(3) Connect the anchor part of the front seat outer belt assembly with the bolt.
Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
(b) w/o Belt Tension Sensor:
(1) Connect the anchor part of the front seat outer belt assembly with the bolt.