IS 250C V6-2.5L (4GR-FSE) (2011)
15. REMOVE REAR SEAT 3 POINT TYPE INNER BELT ASSEMBLY
(a) Remove the 2 bolts.
(b) Remove the rear seat 3 point type outer belt assembly as shown in the illustration.
Installation
SEAT BELT: REAR SEAT INNER BELT ASSEMBLY: INSTALLATION
1. INSTALL REAR SEAT 3 POINT TYPE INNER BELT ASSEMBLY
(a) Insert the rear seat 3 point type inner belt assembly as shown in the illustration.
(b) Temporarily install the rear seat 3 point type inner belt assembly with the 2 bolts.
(c) Fully tighten the bolt [A] first, then the bolt [B] to install the rear seat 3 point type inner belt assembly.
Bolt A - Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)
Bolt B - Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)
2. INSTALL PACKAGE TRAY BRACKET
(a) Install the package tray bracket with the 2 nuts.
3. INSTALL REAR PACKAGE TRAY END PLATE (for LH Side)