IS 250C V6-2.5L (4GR-FSE) (2011)
SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: ON-VEHICLE INSPECTION
CAUTION:
Be sure to follow the correct removal and installation procedures of the front seat outer belt assembly.
1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
(b) Visually check for defects with the front seat outer belt assembly installed on the vehicle.
(1) The defects are as follows:
Cuts on the front seat outer belt assembly
Small cracks on the front seat outer belt assembly
Significant discoloration on the front seat outer belt assembly
OK:
No defects are found.
HINT
If any of the defects is found, replace the front seat outer belt assembly with a new one.
2. INSPECT FRONT SEAT OUTER BELT ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
(a) Perform a diagnostic system check See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
(b) Visually check for defects with the front seat outer belt assembly removed from the vehicle.
(1) The defects are as follows:
Cuts on the front seat outer belt assembly
Small cracks on the front seat outer belt assembly
Significant discoloration on the front seat outer belt assembly
Cracks or other damage to the connector
OK:
No defects are found.
HINT
If any of the defects is found, replace the front seat outer belt assembly with a new one.