IS 250C V6-2.5L (4GR-FSE) (2011)
HINT
Use the same procedure described for the LH side See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Disassembly.
13. REMOVE FRONT SEAT CUSHION INNER SHIELD RH
HINT
Use the same procedure described for the LH side See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Disassembly.
14. REMOVE FRONT POWER SEAT SWITCH (w/o Memory)
HINT
Use the same procedure described for the LH side See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Disassembly.
15. REMOVE POSITION CONTROL ECU AND SWITCH ASSEMBLY (w/ Memory)
HINT
Use the same procedure described for the LH side See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Disassembly.
16. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
HINT
Use the same procedure described for the LH side See: Body and Frame/Seats/Service and Repair/Overhaul/Front Seat
Assembly/Disassembly.
17. REMOVE OCCUPANT DETECTION SENSOR
(a) Remove the 2 hog rings.
(b) Remove the 14 hog rings and the separate type front seat cushion cover from the occupant detection sensor.
Installation
SEAT BELT: OCCUPANT DETECTION SENSOR: INSTALLATION
1. INSTALL OCCUPANT DETECTION SENSOR
(a) Using hog ring pliers, install 14 new hog rings.