IS 250C V6-2.5L (4GR-FSE) (2011)
Installation
PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Rear Side): INSTALLATION
1. INSTALL NO. 3 ULTRASONIC SENSOR RETAINER (for Corner Sensor)
(a) Engage the 4 claws and install the No. 3 ultrasonic sensor retainer to the rear bumper assembly.
Text in Illustration
HINT
*
When installing the retainer, align the keyhole and slit as shown in the illustration.
*
The illustration is for the LH side. The RH side is the opposite of the LH side.
2. INSTALL NO. 1 ULTRASONIC SENSOR (for Corner Sensor)
(a) Engage the claw and install the ultrasonic sensor clip.
(b) Engage the 2 claws and install the No. 1 ultrasonic sensor.