IS 250C V6-2.5L (4GR-FSE) (2011)
Hood Sensor/Switch (For Alarm): Service and Repair
Removal
THEFT DETERRENT / KEYLESS ENTRY: ENGINE HOOD COURTESY SWITCH: REMOVAL
1. REMOVE FRONT BUMPER ASSEMBLY
(a) Remove the front bumper assembly See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Removal.
2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System) See: Sensors and Switches -
Accessories and Optional Equipment/Distance Sensor/Service and Repair/Removal
3. REMOVE LOW PITCHED HORN ASSEMBLY See: Lighting and Horns/Horn/Service and Repair/Low Pitched Horn/Removal
4. REMOVE HOOD LOCK CONTROL CABLE COVER See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release Cable/Service
and Repair/Removal
5. REMOVE HOOD LOCK NUT CAP See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release Cable/Service and
Repair/Removal
6. REMOVE ENGINE HOOD COURTESY SWITCH (HOOD LOCK ASSEMBLY) See: Body and Frame/Doors, Hood and Trunk/Hood/Hood
Latch Release Cable/Service and Repair/Removal