IS 250C V6-2.5L (4GR-FSE) (2011)
If the result is not as specified replace the outer mirror switch assembly.
(b) Check that the LED illuminates.
(1) Apply battery voltage to the outer mirror switch assembly and check that the LED illuminates.
OK:
Text in Illustration
If the result is not as specified replace the outer mirror switch assembly.
2. INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Memory)
(a) Check the switch functions.
(1) For the L position of the mirror select switch:
Measure the resistance according to the value(s) in the table below.