IS 250C V6-2.5L (4GR-FSE) (2011)
PARKING BRAKE: PARKING BRAKE SWITCH (for Automatic Transmission): REMOVAL
1. REMOVE FRONT SEAT ASSEMBLY LH
HINT
Refer to the instructions for Removal of the front seat assembly See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly/Removal.
2. REMOVE CONSOLE BOX
HINT
Refer to the instructions for Removal of the console box See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Front Console Box/Removal.
3. REMOVE NO. 2 CONSOLE BOX DUCT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
4. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY
HINT
Refer to the instructions for Removal of the driver side knee airbag assembly See: Restraint Systems/Air Bag Systems/Air
Bag/Service and Repair/Removal and Replacement/Knee Airbag Assembly (for Driver Side)/Removal.
5. REMOVE FRONT FLOOR FOOTREST LH See: Body and Frame/Interior Moulding / Trim/Foot Rest/Service and Repair/Removal
6. SEPARATE FRONT FLOOR CARPET ASSEMBLY See: Brakes and Traction Control/Parking Brake System/Parking Brake Pedal/Service and
Repair/Removal and Replacement/Removal
7. REMOVE NO. 3 DASH PANEL INSULATOR PAD See: Brakes and Traction Control/Parking Brake System/Parking Brake Pedal/Service and
Repair/Removal and Replacement/Removal
8. REMOVE FRONT FLOOR SILENCER PAD LH
9. REMOVE REAR AIR DUCT GUIDE LH
10. REMOVE REAR NO. 2 AIR DUCT
11. SEPARATE PARKING BRAKE CONTROL PEDAL ASSEMBLY
(a) Remove the 2 nuts and separate the instrument panel junction block assembly.
(b) Remove the 3 nuts and separate the parking brake control pedal assembly from the body.