IS 250C V6-2.5L (4GR-FSE) (2011)
Telescoping Wheel Switch: Service and Repair
Removal
STEERING COLUMN: TILT AND TELESCOPIC MANUAL SWITCH: REMOVAL
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system
before servicing See: Restraint Systems/Air Bag Systems/Service Precautions.
1. PRECAUTION
NOTICE:
Be sure to read Precaution thoroughly before servicing See: Steering and Suspension/Steering/Service Precautions/Steering System.
2. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
3. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Removal and Replacement/Removal
5. REMOVE LOWER NO. 3 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Steering Pad/Removal
6. REMOVE LOWER NO. 2 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Steering Pad/Removal
7. REMOVE STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Steering
Pad/Removal
8. REMOVE STEERING WHEEL ASSEMBLY See: Steering and Suspension/Steering/Steering Wheel/Service and Repair/Removal
9. REMOVE STEERING COLUMN COVER (for Lower Side) See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Removal and Replacement/Removal
10. REMOVE TILT AND TELESCOPIC SWITCH
(a) Disconnect the connector.
(b) Disengage the claw and pull out the tilt and telescopic switch.
NOTICE:
Pushing on the claw too hard will break the claw.