IS 250C V6-2.5L (4GR-FSE) (2011)
/Page-1360004.png)
(a) Remove the 3 nuts (A) and disconnect the wire harness.
(b) Disconnect the 2 connectors (B).
13. REMOVE GENERATOR ASSEMBLY
(a) Remove the terminal cap.
(b) Remove the nut (A) and disconnect the wire harness from terminal B.
(c) Remove the bolt (B) and clamp bracket.
(d) Disconnect the generator connector, and detach the 2 clamps.
(e) Remove the nut, and disconnect the generator bracket.
(f) Remove the 2 bolts and generator.
(g) Remove the 2 bolts and 2 generator brackets.
