IS 250C V6-2.5L (4GR-FSE) (2011)
4. REMOVE STARTER COMMUTATOR END FRAME COVER
(a) Using a screwdriver, remove the starter commutator end frame cover from the starter commutator end frame.
5. REMOVE STARTER ARMATURE ASSEMBLY
(a) Hold the starter commutator end frame between aluminum plates in a vise.
Text in Illustration
NOTICE:
Do not overtighten the vise.
(b) Using snap ring pliers, remove the snap ring.
NOTICE:
Do not drop the starter armature assembly.
(c) Remove the starter armature assembly and plate washer from the commutator end frame.
6. REMOVE PLANETARY GEAR
(a) Remove the 3 planetary gears from the starter drive housing.
7. REMOVE STARTER CENTER BEARING CLUTCH SUB-ASSEMBLY
(a) Remove the starter center bearing clutch sub-assembly with the starter drive lever set pin from the starter drive housing.