IS 250C V6-2.5L (4GR-FSE) (2011)
Standard Voltage:
Text in Illustration
Result:
C -- CHECK HARNESS AND CONNECTOR (POWER SOURCE CONTROL ECU - ECM)
B -- REPLACE ECM See: Powertrain Management/Computers and Control Systems/Engine Control Module/Service and
Repair/Removal
A -- Continue to next step.
10. INSPECT ST CUT RELAY
(a) Remove the ST CUT relay from the engine room relay block No. 2.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance: