IS 250C V6-2.5L (4GR-FSE) (2011)
Removal
STEERING GEAR / LINKAGE: STEERING GEAR: REMOVAL
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
3. SECURE STEERING WHEEL
(a) Secure the steering wheel with the seat belt in order to prevent rotation.
HINT
This operation is useful to prevent damage to the spiral cable.
4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
5. REMOVE FRONT WHEELS
6. REMOVE ENGINE UNDER COVER
7. REMOVE FRONT FLOOR COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
8. REMOVE FRONT FLOOR COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
9. REMOVE NO. 1 BODY MOUNTING BRACKET SUB-ASSEMBLY LH