IS 250C V6-2.5L (4GR-FSE) (2011)
(a) Remove the clip and nut.
(b) Install 2 spacers (SST spacer A) onto the front lower ball joint as shown in the illustration.
SST : 09960-20010
09961-02010
09961-02050
09961-02050
NOTICE:
As SST may be damaged, make sure that the clearance between the arm and spacers is less than 1 mm (0.0394 in.).
(c) Using SST, remove the front lower ball joint assembly from the front lower suspension arm assembly as shown in the illustration.
SST : 09960-20010
09961-02010
09961-02050
09961-02050
Text in Illustration
CAUTION:
Apply grease to the threads and end of the SST bolt.