IS 250C V6-2.5L (4GR-FSE) (2011)
Control Arm: Service and Repair
Rear Upper Arm
Components
REAR SUSPENSION: REAR UPPER ARM: COMPONENTS
Removal
REAR SUSPENSION: REAR UPPER ARM: REMOVAL
HINT
*
Use the same procedure for the RH side and LH side.
*
The procedure listed below is for the LH side.
1. REMOVE REAR WHEEL
2. REMOVE NO. 2 DIFFERENTIAL SUPPORT PROTECTOR See: Suspension Strut / Shock Absorber/Service and Repair/Rear Shock
Absorber/Removal
3. SEPARATE REAR NO. 2 SUSPENSION ARM ASSEMBLY
(a) Support the rear axle assembly with a jack using a wooden block.
Text in Illustration
(b) Remove the bolt and nut, and separate the rear shock absorber with coil spring from the rear No. 2 suspension arm assembly.