IS 250C V6-2.5L (4GR-FSE) (2011)
Control Arm: Service and Repair
Rear Lower Arm
Components
REAR SUSPENSION: REAR LOWER ARM: COMPONENTS
Removal
REAR SUSPENSION: REAR LOWER ARM: REMOVAL
HINT
*
Use the same procedure for the RH side and LH side.
*
The procedure listed below is for the LH side.
1. REMOVE REAR WHEEL
2. REMOVE NO. 2 DIFFERENTIAL SUPPORT PROTECTOR See: Suspension Strut / Shock Absorber/Service and Repair/Rear Shock
Absorber/Removal
3. REMOVE REAR SUSPENSION MEMBER BRACE See: Suspension Strut / Shock Absorber/Service and Repair/Rear Shock
Absorber/Removal
4. REMOVE REAR NO. 1 SUSPENSION ARM ASSEMBLY
(a) Using a jack and wooden block, jack up the rear axle assembly to replicate standard vehicle height conditions.
Text in Illustration