IS 250C V6-2.5L (4GR-FSE) (2011)
48. REMOVE REAR NO. 1 UPPER CONTROL ARM ASSEMBLY (for RH Side)
HINT
Perform the same procedure as the LH side.
49. REMOVE TOE CONTROL LINK SUB-ASSEMBLY LH
(a) Put matchmarks on the toe adjust plate and rear suspension member sub-assembly.
Text in Illustration
(b) Remove the nut, toe adjust cam, toe adjust plate, and toe control link sub-assembly LH.
50. REMOVE TOE CONTROL LINK SUB-ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
51. REMOVE REAR SUSPENSION MEMBER REAR UPPER STOPPER (for LH Side)
(a) Remove the rear suspension member rear upper stopper from the rear suspension member sub-assembly.
52. REMOVE REAR SUSPENSION MEMBER REAR UPPER STOPPER (for RH Side)
HINT
Perform the same procedure as the LH side.
53. REMOVE REAR NO. 1 DIFFERENTIAL MOUNT CUSHION See: Transmission and Drivetrain/Differential Assembly/Differential
Mount/Service and Repair/Removal
54. REMOVE REAR NO. 2 DIFFERENTIAL MOUNT CUSHION See: Transmission and Drivetrain/Differential Assembly/Differential
Mount/Service and Repair/Removal
55. REMOVE REAR SUSPENSION MEMBER FRONT BODY MOUNTING CUSHION (for LH Side)
(a) Using SST, remove the rear suspension member front body mounting cushion, while applying grease to the clearance between the rear
suspension member front body mounting cushion and the rear suspension member sub-assembly.