IS 250C V6-2.5L (4GR-FSE) (2011)
6. INSTALL REAR NO. 1 DIFFERENTIAL MOUNT CUSHION See: Transmission and Drivetrain/Differential Assembly/Differential
Mount/Service and Repair/Installation
7. INSTALL REAR NO. 2 DIFFERENTIAL MOUNT CUSHION See: Transmission and Drivetrain/Differential Assembly/Differential
Mount/Service and Repair/Installation
8. INSTALL REAR SUSPENSION MEMBER REAR UPPER STOPPER (for LH Side)
(a) Install the rear suspension member rear upper stopper to the rear suspension member sub-assembly.
9. INSTALL REAR SUSPENSION MEMBER REAR UPPER STOPPER (for RH Side)
HINT
Perform the same procedure as the LH side.
10. TEMPORARILY TIGHTEN TOE CONTROL LINK SUB-ASSEMBLY LH
(a) Install the toe control link sub-assembly LH and insert the toe adjust cam from the front of the vehicle. Then, install the toe adjust plate and
temporarily tighten the nut.
Text in Illustration
NOTICE:
Align the matchmarks on the rear suspension member sub-assembly and toe adjust plate.
11. TEMPORARILY TIGHTEN TOE CONTROL LINK SUB-ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
12. TEMPORARILY TIGHTEN REAR NO. 1 UPPER CONTROL ARM ASSEMBLY (for LH Side)
(a) Temporarily tighten the rear No. 1 upper control arm assembly to the rear suspension member sub-assembly with the bolt, nut and washer.
13. TEMPORARILY TIGHTEN REAR NO. 1 UPPER CONTROL ARM ASSEMBLY (for RH Side)
HINT
Perform the same procedure as the LH side.
14. INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY