IS 250C V6-2.5L (4GR-FSE) (2011)
(c) Using SST, remove the toe control link sub-assembly from the rear axle assembly as shown in the illustration.
SST : 09960-20010
09961-02010
09961-02060
09961-02060
Text in Illustration
CAUTION:
Apply grease to the threads and end of the SST bolt.
NOTICE:
*
Install SST so that A and B are parallel.
*
Be sure to place a wrench on the part indicated in the illustration.
*
Make sure that SST is securely positioned on the rear axle carrier spacer.
*
Use caution not to damage the rear axle carrier sub-assembly because it is made of aluminum and may be damaged easily.
*
Do not damage the ball joint dust cover.
*
Make sure that the SST string is securely tied to the vehicle.
If the rear axle carrier spacer has come off, replace the rear axle carrier sub-assembly with a new one.
(d) Put matchmarks on the toe adjust plate and rear suspension member sub-assembly.
Text in Illustration
(e) Remove the nut, toe adjust cam, toe adjust plate and toe control link sub-assembly.