IS 250C V6-2.5L (4GR-FSE) (2011)
(a) Install the rear suspension member brace with the 2 bolts.
Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)
7. INSTALL NO. 2 DIFFERENTIAL SUPPORT PROTECTOR
(a) Install the No. 2 differential support protector with the 2 nuts.
8. INSTALL CAP
(a) Engage the 4 claws to install the cap.
9. INSTALL REAR WHEEL HOUSE LINER
10. INSTALL REAR NO. 2 FLOOR HOUSING SHIELD
11. INSTALL REAR WHEEL
Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)
12. INSPECT AND ADJUST REAR WHEEL ALIGNMENT
See: Alignment/Service and Repair/Rear Wheel Alignment.
13. INSPECT AND ADJUST HEADLIGHT AIMING (w/ HID Headlight System)
See: Lighting and Horns/Headlamp/Adjustments.
Disposal
REAR SUSPENSION: REAR SHOCK ABSORBER: DISPOSAL
1. DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY
(a) Fully extend the rod of the rear shock absorber assembly.