IS 250C V6-2.5L (4GR-FSE) (2011)
Wheel Fastener: Service and Repair
Rear Axle Hub Bolt
Components
AXLE AND DIFFERENTIAL: REAR AXLE HUB BOLT: COMPONENTS
Replacement
AXLE AND DIFFERENTIAL: REAR AXLE HUB BOLT: REPLACEMENT
HINT
*
Use the same procedure for the RH side and LH side.
*
The procedure listed below is for the LH side.
1. REMOVE REAR WHEEL
2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY See: Brakes and Traction Control/Parking Brake System/Service and
Repair/Overhaul/Disassembly
3. REMOVE REAR NO. 1 DISC BRAKE CALIPER PLATE See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal
and Replacement/Rear Brake/Removal
4. REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG
5. REMOVE REAR DISC See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Rear
Brake/Removal
6. REMOVE REAR AXLE HUB BOLT