IS 250C V6-2.5L (4GR-FSE) (2011)
SST : 09950-30012
09955-03040
Text in Illustration
(d) Using SST and a 30 mm socket wrench, install and tighten a new lock nut.
Torque : 126 Nm (1285 kgf-cm, 93 ft-lbf)
(e) Using a chisel and hammer, securely stake the lock nut.
7. INSTALL PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY
HINT
See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Removal and Replacement/Installation
8. ADD AUTOMATIC TRANSMISSION FLUID
HINT
See: Fluid - A/T/Service and Repair/A760E Automatic Transmission