IS 250C V6-2.5L (4GR-FSE) (2011)
Oil seal drive in depth:
5.4 to 5.8 mm (0.213 to 0.228 in.)
NOTICE:
*
Keep the lip free of foreign matter.
*
Do not tap the oil seal at an angle.
5. INSTALL PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY
HINT
See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service and Repair/Removal and Replacement/Installation
6. ADD AUTOMATIC TRANSMISSION FLUID
HINT
See: Fluid - A/T/Service and Repair/A960E Automatic Transmission