IS 250C V6-2.5L (4GR-FSE) (2011)
Clutch Pedal Assembly: Service and Repair
Installation
CLUTCH: CLUTCH PEDAL: INSTALLATION
1. INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSHING
(a) Apply MP grease to the inside of a new clevis bushing.
Text in Illustration
(b) Install the clevis bushing to the clutch pedal.
HINT
Install the clevis bushing from the left side of the vehicle.
2. INSTALL CLUTCH PEDAL PAD
(a) Install the clutch pedal pad to the clutch pedal.
Text in Illustration
3. INSTALL CLUTCH PEDAL CUSHION
(a) Using needle-nose pliers, install the 3 clutch pedal cushions to the clutch pedal.
4. INSTALL CLUTCH PEDAL SHAFT COLLAR
(a) Apply MP grease to the inner, outer and end surfaces of 2 new pedal bushings.