IS 250C V6-2.5L (4GR-FSE) (2011)
34. INSTALL TONNEAU COVER ASSEMBLY See: Body and Frame/Roof and Associated Components/Convertible Top/Service and
Repair/Removal and Replacement/Installation
35. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER See: Body and Frame/Roof and Associated Components/Convertible
Top/Service and Repair/Removal and Replacement/Installation
36. INSTALL ROPE HOOK ASSEMBLY (for Rear Side) See: Body and Frame/Roof and Associated Components/Convertible Top/Service and
Repair/Removal and Replacement/Installation
37. INSTALL LUGGAGE DOOR LOCK PROTECTOR See: Body and Frame/Roof and Associated Components/Convertible Top/Service and
Repair/Removal and Replacement/Installation
38. INSTALL DECK SIDE TRIM BOX LH See: Body and Frame/Roof and Associated Components/Convertible Top/Service and Repair/Removal
and Replacement/Installation
39. INSTALL DECK SIDE TRIM BOX RH See: Body and Frame/Roof and Associated Components/Convertible Top/Service and Repair/Removal
and Replacement/Installation
40. INSTALL SPARE WHEEL COVER TRAY ASSEMBLY (w/o Spare Tire) See: Body and Frame/Roof and Associated Components/Convertible
Top/Service and Repair/Removal and Replacement/Installation
41. INSTALL SPARE TIRE (w/ Spare Tire)
42. INSTALL SPARE WHEEL CUSHION (w/ Spare Tire) See: Body and Frame/Roof and Associated Components/Convertible Top/Service and
Repair/Removal and Replacement/Installation
43. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (w/o Spare Tire) See: Body and Frame/Roof and Associated Components/Convertible
Top/Service and Repair/Removal and Replacement/Installation
44. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (w/ Spare Tire) See: Body and Frame/Roof and Associated Components/Convertible
Top/Service and Repair/Removal and Replacement/Installation
45. SET TONNEAU COVER
(a) Move the tonneau cover to the position shown in the illustration.
46. SET METAL TOP ROOF
(a) Stow the upper back window frame sub-assembly in the luggage compartment.
NOTICE:
*
Perform this operation using 2 persons.
*
Synchronize the movement of the left and right sides of the upper back window frame sub-assembly when moving it.
(b) Using a 5 mm hexagon wrench, turn the sliding roof drive gear sub-assembly counterclockwise to release the lock of the front slide roof panel
sub-assembly.