IS 250C V6-2.5L (4GR-FSE) (2011)
(d) Apply adhesive between the quarter window front weatherstrip and quarter window front weatherstrip retainer.
Adhesive:
Toyota Genuine Windshield Glass Adhesive or equivalent
Text in Illustration
NOTICE:
Allow the primer to dry for 3 minutes or more.
(e) Apply instant adhesive (cyanoacrylate) to the quarter window front weatherstrip at the position indicated in the illustration and install the
quarter window front weatherstrip.
Text in Illustration
NOTICE:
Make sure not to apply too much adhesive. If too much adhesive is applied, it will drip onto the visible part of the quarter window
front weatherstrip retainer, resulting in damage.
(f) Lightly push the quarter window front weatherstrip to fully attach it.
HINT
Press the glass with a force of 98 N (10 kgf, 22 lbf) or more.
(g) Remove any excess Toyota genuine windshield glass adhesive before it sets.
(h) Hold the quarter window front weatherstrip using protective tape until the applied adhesive becomes hard.
NOTICE:
Do not drive the vehicle within the time described in the table below.
Minimum Time: