IS 250C V6-2.5L (4GR-FSE) (2011)
30. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Installation
31. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Installation
32. INSTALL FRONT WIPER ARM HEAD CAP See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Installation
33. INSTALL FRONT OUTER BODY PILLAR ASSEMBLY LH See: Body and Frame/Exterior Moulding / Trim/Service and Repair/Installation
34. INSTALL ROOF DRIP SIDE FINISH MOULDING LH See: Body and Frame/Exterior Moulding / Trim/Service and Repair/Installation
35. INSTALL FRONT OUTER BODY PILLAR ASSEMBLY RH
HINT
Use the same procedure for the RH side and the LH side.
36. INSTALL ROOF DRIP SIDE FINISH MOULDING RH
HINT
Use the same procedure for the RH side and the LH side.
37. INSTALL FRONT UPPER FENDER PROTECTOR LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Installation
38. INSTALL FRONT UPPER FENDER PROTECTOR RH
HINT
Use the same procedure for the RH side and the LH side.
39. INSTALL ENGINE ROOM SIDE COVER LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Installation
40. INSTALL ENGINE ROOM SIDE COVER RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Installation
41. INSTALL COOL AIR INTAKE DUCT SEAL See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation