IS 250C V6-2.5L (4GR-FSE) (2011)
Washer Fluid Level Switch: Service and Repair
Installation
WIPER / WASHER: WASHER LEVEL WARNING SWITCH: INSTALLATION
1. INSTALL WASHER LEVEL WARNING SWITCH ASSEMBLY
(a) Install the washer level warning switch assembly.
(b) Connect the connector.
(c) Connect the washer hose.
2. INSTALL FRONT BUMPER ASSEMBLY See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
3. INSTALL RADIATOR GRILLE PROTECTOR See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
4. INSTALL COOL AIR INTAKE DUCT SEAL See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
5. ADD WASHER FLUID See: Windshield Washer Motor/Service and Repair/Installation
6. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT See: Lighting and Horns/Fog/Driving Lamp/Adjustments
7. PREPARATION FOR FOG LIGHT AIMING See: Lighting and Horns/Fog/Driving Lamp/Adjustments
8. INSPECT FOG LIGHT AIMING See: Lighting and Horns/Fog/Driving Lamp/Adjustments
9. ADJUST FOG LIGHT AIMING See: Lighting and Horns/Fog/Driving Lamp/Adjustments