IS 250C V6-2.5L (4GR-FSE) (2011)
Windshield Washer Motor: Service and Repair
Installation
WIPER / WASHER: WASHER MOTOR: INSTALLATION
1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
(a) Install the windshield washer motor and pump assembly as shown in the illustration.
2. INSTALL WINDSHIELD WASHER JAR AND PUMP ASSEMBLY
(a) Install the windshield washer jar and pump assembly with the 3 bolts.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Install the upper part of the windshield washer jar and pump assembly to the windshield washer jar and pump assembly.
(c) Install the bolt.
Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)
(d) Connect each connector.
(e) Connect the washer hose.
3. INSTALL NO. 3 COOL AIR INTAKE DUCT SUB-ASSEMBLY
(a) Engage the guide to install the No. 3 cool air intake duct sub-assembly.