IS 250C V6-2.5L (4GR-FSE) (2011)
(a) Remove the roof headlining assembly See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Roof Headlining (for Front Side)/Removal.
7. REMOVE FRONT PILLAR UPPER COVER ASSEMBLY LH See: Body and Frame/Exterior Moulding / Trim/Service and Repair/Removal
8. REMOVE ROOF DRIP SIDE FINISH MOULDING LH See: Body and Frame/Exterior Moulding / Trim/Service and Repair/Removal
9. REMOVE FRONT PILLAR UPPER COVER ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side.
10. REMOVE ROOF DRIP SIDE FINISH MOULDING RH
HINT
Use the same procedure for the RH side and LH side.
11. REMOVE FRONT WIPER ARM HEAD CAP
(a) Using a screwdriver, remove the front wiper arm head cap.
Text in Illustration
HINT
*
Use the same procedure for the RH side and LH side.
*
Tape the screwdriver tip before use.
12. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH
(a) Remove the nut and the front wiper arm and blade assembly LH.
13. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH
(a) Remove the nut and the front wiper arm and blade assembly RH.
14. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY