IS 250C V6-2.5L (4GR-FSE) (2011)
/Page-2620003.png)
(1) Clean the wiper arm serrations.
(c) When reusing the windshield wiper link assembly:
(1) Clean the wiper pivot serrations with a wire brush.
Text in Illustration
(d) Install the front wiper arm and blade assembly LH with the nut at the position as shown in the illustration.
Torque : 22 Nm (224 kgf-cm, 16 ft-lbf)
HINT
Hold the arm hinge by hand to tighten the nut.
Text in Illustration
5. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH
(a) Operate the wiper, and stop the windshield wiper motor at the automatic stop position.
(b) When reusing the front wiper arm and blade assembly RH:
(1) Clean the wiper arm serrations.
(c) When reusing the windshield wiper link assembly:
(1) Clean the wiper pivot serrations with a wire brush.
Text in Illustration
