IS 300 L6-3.0L (2JZ-GE) (2001)
o. Rotate the camshaft with a wrench at the hexagon position, bring the forward straight pin up.
p. Loosen the 12 bearing cap bolts as shown, until they can be turned by hand; retighten in several passes.
Torque: 20 Nm (200 kgf-cm, 15 ft. lbs.)
q. Turn the camshaft 1/3 of a revolution.
r.
Loosen the 8 bearing cap bolts as shown, until they can be turned by hand; retighten in several passes.
Torque: 20 Nm (200 kgf-cm, 15 ft. lbs.)
s. Turn the camshaft a further 1/3 of a revolution.
t.
Loosen the 8 bearing cap bolts as shown, until they can be turned by hand; retighten in several passes.
Torque: 20 Nm (200 kgf-cm, 15 ft. lbs.)