IS F V8-5.0L (2UR-GSE) (2008)
(a) Engage the 3 claws and install the front seat belt anchor cover sub-assembly.
44. INSTALL REAR DOOR SCUFF PLATE LH
(a) Engage the 2 clips.
(b) Engage the 5 claws and install the rear door scuff plate LH.
45. INSTALL REAR DOOR SCUFF PLATE RH
HINT: Use the same procedure for the RH side and the LH side.
46. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter
A/T/Service and Repair/Shift Lever/Installation
47. CONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Shifter A/T/Service and Repair/Shift Lever/Installation
48. ADJUST SHIFT LEVER POSITION See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Adjustments
49. INSTALL FRONT NO. 1 FLOOR HEAT INSULATOR See: Transmission and Drivetrain/Drive/Propeller Shafts, Bearings and
Joints/Drive/Propeller Shaft/Service and Repair/Installation
50. INSTALL FRONT EXHAUST PIPE ASSEMBLY See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and
Repair/Installation
51. CONNECT HEATED OXYGEN SENSOR See: Engine, Cooling and Exhaust/Exhaust System/Exhaust Pipe/Service and Repair/Installation