IS F V8-5.0L (2UR-GSE) (2008)
Headlamp Alignment Sensor: Service and Repair
Installation
LIGHTING (EXT): HEIGHT CONTROL SENSOR: INSTALLATION
LIGHTING
1. INSTALL FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
(a) Install the 2 bolts.
Torque: 14 Nm (143 kgf-cm, 10 ft-lbf)
(b) Install the front height control sensor sub-assembly LH with the nut.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(c) Connect the connector.
2. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
(a) When replacing the rear height control sensor sub-assembly LH:
(1) Align the matchmarks and also the trace of the nut, and install a new rear height control sensor sub-assembly LH and bracket.
(b) When reusing the rear height control sensor sub-assembly LH:
(1) Align the matchmarks on the rear height control sensor sub-assembly and bracket.
(c) Install the rear height control sensor sub-assembly LH with the 2 bolts and nut.
Bolt - Torque: 14 Nm (143 kgf-cm, 10 ft-lbf)
Nut - Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)