IS F V8-5.0L (2UR-GSE) (2008)
(a) Using SST and a press, press the generator coil assembly into the drive end frame.
SST: 09612-70100
(b) Tighten the 4 through bolts.
Torque: 7.5 Nm (76 kgf-cm, 68 in-lbf)
4. INSTALL GENERATOR BRUSH HOLDER ASSEMBLY
(a) Insert a pin (diameter 1.0 mm (0.039 in.)) into the generator brush holder assembly to secure the 2 brushes in place.
(b) Install the generator brush holder to the generator coil assembly with the 2 screws.
Torque: 1.8 Nm (18 kgf-cm, 16 in-lbf)
(c) Remove the pin (diameter 1.0 mm(0.039 in.)).
5. INSTALL GENERATOR TERMINAL INSULATOR
(a) Install the generator terminal insulator to the generator coil assembly.
6. INSTALL GENERATOR REAR END COVER