IS F V8-5.0L (2UR-GSE) (2008)
(b) Measure the resistance according to the value in the table below.
HINT: Do not disconnect the shift lock control ECU connector.
Standard Resistance:
Shift Paddle Switch
AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT PADDLE SWITCH: INSPECTION
AA80E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT PADDLE SWITCH: INSPECTION
1. INSPECT SHIFT PADDLE SWITCH
(a) Disconnect the switch wire connector from the transmission shift switch.
(b) Measure the resistance between each terminal when the paddle shift is moved to each position.
Standard Resistance
If the resistance value is not as specified, replace the shift paddle switch.