lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Emergency Battery|Service and Repair|Page 10919 > < Emergency Battery|Service and Repair|Page 10917
Page 4
background image

NOTE:  After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory
and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery
terminal.

3. REMOVE NO.1 COOLER COVER (w/ Rear Cooler)
4. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
5. REMOVE ROPE HOOK ASSEMBLY
6. REMOVE ROPE HOOK
7. REMOVE DECK TRIM SIDE BOARD LH
8. REMOVE DECK TRIM SIDE BOARD RH
9. REMOVE LUGGAGE COMPARTMENT NO.1 LIGHT ASSEMBLY

10. REMOVE LUGGAGE COMPARTMENT NO.2 TRIM HOOK (w/o Rear Cooler)
11. REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT
12. REMOVE REAR FLOOR FINISH PLATE
13. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH
14. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

15. REMOVE MAYDAY BATTERY

a. Disconnect the connector.
b. Remove the nut, battery and upper bracket.

16. REMOVE LOWER BRACKET

a. Remove the 2 nuts and bracket.
b. Disconnect the clamp.

INSTALLATION

1. INSTALL LOWER BRACKET

Emergency Battery|Service and Repair|Page 10919 > < Emergency Battery|Service and Repair|Page 10917