LS 460 V8-4.6L (1UR-FSE) (2007)
NOTE: Do not touch the cone part of the speaker.
INSTALLATION
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed below are for the LH side.
1. INSTALL REAR NO. 3 SPEAKER ASSEMBLY (for 19 Speakers)
a. Align the speaker to the door position pins A.
b. Install the speaker with the 2 screws.
NOTE: Do not touch the cone part of the speaker.
c. Attach the clamp and connect the connector.
2. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 19 Speakers)
a. Temporarily install the speaker by attaching the claw of the speaker to the door panel.
b. Install the speaker with the 3 screws.
NOTE: Do not touch the cone part of the speaker.
HINT: Install the screws in the order shown in the illustration.
c. Connect the connector.
3. INSTALL REAR NO. 1 SPEAKER ASSEMBLY