LS 460 V8-4.6L (1UR-FSE) (2007)
a. Using a screwdriver, detach the 4 clips and remove the hole cover.
HINT: Tape the screwdriver tip before use.
3. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY
a. Remove the 2 bolts.
b. Remove the speaker and disconnect the speaker connector.
NOTE: Do not touch the cone part of the speaker.
4. REMOVE FRONT PILLAR GARNISH LH
5. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
a. Using a screwdriver, detach the 2 clips and 7 claws.
HINT: Tape the screwdriver tip before use.
b. Remove the speaker panel.
6. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY