LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-2039014.png)
(1) Attach the sponge sealer (7 x 7 x 70 mm with brown backing paper) from the Circle "B" area in Figure 24 and the edge indicated by "D" in
cross sectional view from Figure 26.
(2) Attach sponge sealer (5 x 5 x 925 mm) starting at the front surface of sponge sealer (7 x 7 x 70 mm with brown backing paper).
NOTICE
Ensure both sponge sealer sections, 2 (7 x 7 x 70 mm) with brown backing paper and 3 (5 x 5 x 925 mm), contact each other.
(3) Attach the sponge sealer (12 x 12 x 60 mm) upward.
