lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

ABOUT US
Body - Front Side Window Wind Noise At Highway Speeds|Page 11809 > < Body - Front Side Window Wind Noise At Highway Speeds|Page 11807

LS 460 V8-4.6L (1UR-FSE) (2007)

Page 17
background image

2. Attach the rubber stabilizer (refer to 1 in Figure 32) using instant "super" glue.

3. Start from the rear (near the B-pillar end of the belt molding).

4. Align the end of the rubber stabilizer to the last screw hole in the front door glass outer weatherstrip.

Step D: Add EPT foam to glass run rubber.

1. Add EPT foam to glass run rubber.

Foam Dimensions: 7 x 7 x 70 mm (0.07 x 0.07 x 2.76 in.)

Body - Front Side Window Wind Noise At Highway Speeds|Page 11809 > < Body - Front Side Window Wind Noise At Highway Speeds|Page 11807