LS 460 V8-4.6L (1UR-FSE) (2007)
0. Remove the front door No.2 weatherstrip.
HINT
This is the weatherstrip located at the top of the door.
P. Remove the front door belt molding sub-assembly.
NOTE
^
Only 3 of the 7 rivets need to be drilled out (numbers 2, 4, & 5 in Figure 19). Drill out the 3 rivets that do NOT have a pink paint mark next to
the rivet.
(1) Wrap tape around a 4-mm (0.157-in.) drill bit.
(2) Lightly press the drill against the rivet and drill off the rivet's flange.
NOTICE