LS 460 V8-4.6L (1UR-FSE) (2007)
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures listed below are for the LH side.
1. REMOVE ENGINE ROOM SIDE COVER LH
2. REMOVE FRONT FENDER PROTECTOR UPPER LH
a. Using a screwdriver, detach the 3 clips and remove the front fender protector.
HINT: Tape the screwdriver tip before use.
3. REMOVE HOOD SUPPORT ASSEMBLY LH
a. Using a screwdriver, remove the hood support assembly while releasing the 2 clips.
HINT: Tape the screwdriver tip before use.
NOTICE: Remove the hood support assembly while supporting the hood by hand.
4. REMOVE BRACKET HOOD STAY LH
a. Remove the 1 bolt and bracket hood stay LH.
NOTICE: Remove the hood support assembly while supporting the hood by hand.