LS 460 V8-4.6L (1UR-FSE) (2007)
a. Remove the 2 screws.
b. Detach the claw.
c. Pass the front seat outer belt floor anchors through the center pillar garnish, and remove the center pillar garnish.
17. REMOVE CENTER PILLAR GARNISH UPPER RH
HINT: Use the same procedures described for the LH side.
18. REMOVE SHOULDER BELT ANCHOR COVER LH
a. Detach the 6 claws of the cover, and slide the cover in the direction of the arrow to remove it.
19. REMOVE SHOULDER BELT ANCHOR COVER RH
HINT: Use the same procedures described for the LH side.
20. REMOVE REAR SEAT SIDE GARNISH LH