LS 460 V8-4.6L (1UR-FSE) (2007)
/Page-2091051.png)
a. Slide the cover in the direction shown in the illustration and attach the 6 claws to install the cover.
46. INSTALL SHOULDER BELT ANCHOR COVER RH
HINT: Use the same procedures described for the LH side.
47. INSTALL CENTER PILLAR GARNISH UPPER LH
a. Pass the front seat outer belt floor anchors the center pillar garnish.
b. Attach the claw to install the center pillar garnish.
c. Install the 2 screws.
48. INSTALL CENTER PILLAR GARNISH UPPER RH
HINT: Use the same procedures described for the LH side.
49. INSTALL CENTER PILLAR GARNISH LOWER LH
