LS 460 V8-4.6L (1UR-FSE) (2007)
Memory Positioning Module: Technical Service Bulletins
Interior - Memory Seat Initialization Procedure
PRE-DELIVERY SERVICE
PD075-06
REVISED
Title:
INITIALIZATION OF FRONT MEMORY
SEAT ECU DURING PDS
Models:
'07 LS 460
September 27, 2006
TSIB REVISION NOTICE:
^
November 10, 2006: Step 1 and the corresponding illustration in "Driver's Seat Initialization Procedure" section have been updated. The "Front
Passenger's Seat Initialization Procedure" section has been added.
Previous versions of this TSIB should be discarded.
Introduction
As a result of the removal of the DCC fuses (No. 1 and No. 2), the driving position memory" function of the driver's seat will be inoperative due to loss
of the seat position memory stored in the seat ECU.
Initialize the front memory seat ECU after installing the DCC fuses during Pre-Delivery Service (PDS).
Applicable Vehicles
^
2007 model year LS 460 vehicles.
Warranty Information
Driver's Seat Initialization Procedure